The TouchIT Board does not get an image from the USB cable, it needs to be connected to a projector via a suitable connection such as HDMI, DVI, VGA (blue 15pin D-Sub) S-Video or Composite Video also known as TV Out. The computer will then to betoggled to get the image to display through the [...]
Yes, you can use dry erase markers on the no glare version of the TouchIT Board however you will need to use substantially more effort to remove the ink. We recommend a good quality board cleaner that is available from any office supply store to clean this particular surface.
The first thing to check is whether the projector is connected and switched on. You should then check if you have switched to the external display on your laptop - this is usually a key press - Alt + F4 for example to toggle the screen.
The TouchIT Board does not have any lines per say, this measurement is normall used for electromagnetic interactive whiteboards boards
The cable that comes with the TouchIT Baord is 4.5m or 15ft.
The TouchIT Server application can be installed on any computer, there is no license for this software. The Wizteach software that is supplied with the TouchIT Board comes with a single user licese which means it can only be installed on 1 computer. 5 user and site licenses are available for purchase.
The TouchIT Board registers your first point in 20m/s and subsequent points in 8m/s This speed means that it is not possible to move your hand quicker than the TouchIT Board can track
Simply log onto www.touchittechnologies.com/register and fill in the form
In the TouchIT Board package we do supply wall mount instructions. These instructions can also be downloaded from the IWB product page www.touchittechnologies.com - choose the TouchIT Board and the instructions are available on the right hand side of the page.
After connecting the board with the USB cable and installing the server application, you calibrate the TouchIT Board by right clicking on the green hand that is found in the system tray and then choosing the calibrate option. Cross hairs will then appear on your screen that you need to touch the centre of in [...]