Does it have a projector
The TouchIT Board does not come with a projector. The Interactive LED does not need a projector, think of it as a TV.
The TouchIT Board does not come with a projector. The Interactive LED does not need a projector, think of it as a TV.
The serial number can be found in the bottom right hand corner of the board, near the USB connection. It is a sticker that is on the aluminium frame next to the corner plastic. If there is no sticker there, you can find a larger sticker on the back of the board or on the [...]
In the downloads section of the website
The downloads section of the website has the latest available downloads for your product.
The first thing to do is to recalibrate. If you have not touched every cross-hair or not been accurate in your selections, this will eliminate this problem. If after recalibration there is still an issue, check that you have a nice square image filling as much of the TouchIT Board as possible. Adjust the image, [...]
The TouchIT Board uses Infra-red technology to make a solid porcelain enameled steel surface into a touch sensitive surface.
The TouchIT Board will work with any projector. However, you should check that the aspect ratio of the projector matches the TouchIT board that you have purchased. This will be either a 16:9 or a 4:3
You do not need an external power supply for the TouchIT Board, it is self powered over 5V USB.
Boards with serial numbers less than 400 work on XP and Vista. Boards with serial number of 400 or greater, work on XP, Vista, 7, Linux, MAC.
If you have a TouchIT Board with a serial number lower than 400 then XP and lower. All other boards XP-Win8