The board surface is made of P3 emanel steel manufactured by Steelcase in Europe and the USA.

The standard warranty of the TouchIT Board is 2 years, however, if you register your TouchIT Board on the website, you can upgrade this to 3 years for free.

The TouchIT Board has a non-physical resolution of 4096 x 4096

Steelcase offers a lifetime guarantee on its enamel steel for normal use.

The difference is really in the name. The no glare surface performs better with a projector in that there is no glare or hotspot. The downside of this surface is that you have to use a little more effort to remove the dry erase markers from the surface. The low glare can be cleaned with [...]

The driver board was an earlier model of the TouchIT Board that was discontinued in Auguest 2009 and replaced by the HID version. The driver version is not supported by Win7 or MAC or Linux (only Vista and XP) whereas the HID board has support for all of the above.

The number 4:3 and 16:9 refer to the aspect ratio of the projector. This is the relationship between the height and the width of the image. 4:3 is the traditional aspect ratio for television whereas 16:9 is a widescreen format. Check which size of TouchIT Board you have, the 78" & 90" are 16:9 and [...]

The TouchIT Board is a touch-based interactive whiteboard that gives you full mouse control of your computer from the board.

To use your TouchIT Board, you need the board, a USB cable to connect to your computer, a projector connected to your computer and that is it. You install the software which allows you to calibrate the board and you then have full control of your computer from the touch sensitive interactive whiteboard.

We recommend any good brand of markers that are available at your local office supplies store.